1 Minute General Purpose Gel Epoxy - .84ozGeneral Purpose 1 Minute Gel Epoxy is a fast setting, two-part adhesive and filler system specially formulated with a Blue Dye Indicator that disappears when it’s fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of “ready to use”.Features:Non-drip formula allows for mess free applicationCan easily be applied to overhead and hard to reach placesSets in just 1 minute/Cures in 5 minutesBlue dye indicator disappears when epoxy is ready to applyNo clamping requiredBonds to metals, hard plastics, ceramics, and more!Applications:Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, and metal and rubber.Directions:PROTECT: Work area must be protected from accidental spills.CLEAN: Surfaces must be clean, dry and free of grease and oil.PREPARE: Roughen smooth surfaces (using abrasives or sandpaper).OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger back slightly (1/8”). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger tostop flow. Snap cap back on.MIX QUICKLY: Quickly and thoroughly mix until blue color turns clear (about 15 sec). APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately (product sets in approximately 60 seconds). Remove any excess epoxy immediately.CURE TIME: Usable strength is reached in 1 hour at 72ºF (22ºC).Cooler temperatures may require longer set time.CLEAN-UP: Attach nozzle cap and store in molded tray.NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.