The HummInbird XFM 9 20 Plastic Flush-Mount Thru-Hull Transducer Is An Economical Alternative To Bronze Transducers, And Works With Thinner Hulls Such as Aluminum. Constructed With An Internal, Steel Sleeve That provides Extra Reinforcement, This Thru-Hull Transducer Is Not Recommended For trailered boats, And HummInbird recommends You Have It professionally Installed Due To The Fact That It Requires a Hole Be Drilled In The Hull. The XFM 9 20 Is a Dual-Beam, Flush-Mount Transducer With 20-, And

The Advanced Accessory System Pc Connection Kit Includes: Pc Serial Port Cable With Db9 Connector, AA Battery Power Cable And Detailed instructions. For Use With Upgradeable And GPS Products Without a Card Reader.

For All 800 & 900 Series units. Set Of Two Mounting knobs.

The Humminbird 7400831 GM 2 Mount System Is The gimbal Mount For All Humminbird 900 Series Products. This gimbal Mount Does Not Include a Swivel Mount Or knobs.

The Humminbird SW Transom Mount Speed Sensor provides Digital Reading Of Your Speed Through The Water, And Allows You To Activate The triplog features. The SW Speed Sensor Comes With a 20-Foot Cable, Mounts On Your Boat's Transom Mount, And Has a Speed Range Of 2- To 75-miles Per Hour. This Kit Is Compatible With Humminbird's Matrix, And FIshfinder Series, as Well as Their Ff And 900-Series Sonar units.

Adapts Installed 2-Pin Transducers To Current Fishfinders. Simplifies Installation Of New Fishfinder By Using Existing Installed Transducer.

The In-Dash Mounting Kit provides The Capability To Install a Unit In The Dash. The Same Rugged Construction as The Unit makes For a Durable And Integrated Installation. Description: In-Dash Mounting Kit For All 700 Series Products For Use With: 727, 737, 767, 777C2, 787C2.

The Mount And Transducer Kits Include Everything Necessary To Set Up a Second Mounting Station With a Dedicated Trolling Motor Transducer. Description: Dual Beam Transducer Kit - Includes a XTM 9 20 T, MS M, And Pc 10 For Use With: Matrix 10, 12, 15, 17, 20, 27, 67, 77C, 87C, 97, 717, 727, 737, 767, 777, 787, 323, 343, 363, 383, 141, 161, PMax10, PMax15, PMax20, PMax210, PMax215, PMax220, 917C, 931C, 937C, 957C, 997C, 515, 525, 535, 565,580, 585C, 595C, Piranha 2, Piranha 4, XP2000.

System Link Cable Accessory System Y Cable That Allows To Connect Two units To One GPS Receiver. One Side Of The Y Cable Is 12 inches Long And The Other Side Is 20 Feet Long.

Sonar Covers. Hard Plastic Cover protects Your Humminbird During Transport And Storage. For Models: 700 Series. Style: Plastic.

The In-Dash Mounting Kit provides The Capability To Install a Unit In The Dash. The Same Rugged Construction as The Unit makes For a Durable And Integrated Installation. Description: In-Dash Mounting Kit For All 300 Series Products For Use With: 141C, 323, 343C, 363, 383C.

The HummInbird XNT 9 20 T Transom Mount Transducer Is a High-Speed Transducer Designed To Mount On The Transom, Or Back, Of The Boat, In Contact With The Surface Of The Water, And Operate In cOnjunctiOn With a Compatible HummInbird Sonar Or Fish Finder System. This Unit Is a Single And DualBeam Transducer That features 20- And 60-Degree cOne Angles operatIng On 200 Kilohertz And 83 Kilohertz frequencies respectively.

The HummInbird XHS 9 HDSI 180 T Transom Mount Transducer Is a High-Speed Transducer Designed To Mount On The Transom, Or Back, Of The Boat, In Contact With The Surface Of The Water, And Operate In cOnjunctiOn With a Compatible HummInbird Sonar Or Fish Finder System. This Unit Is Combination DualBeam Plus Transducer That features 20- And 60-Degree cOne Angles operatIng On 200 Khz And 83 kHx frequencies respectively, as Well as a Side-imagIng Sonar With Two 84-Degree beams operatIng at 800 Khz. T

The HummInbird XNT 9 Si 180 T Transom Mount Transducer Is a High-Speed Transducer Designed To Mount On The Transom, Or Back, Of The Boat, In Contact With The Surface Of The Water, And Operate In cOnjunctiOn With a Compatible HummInbird Sonar Or Fish Finder System. This Unit Is Combination DualBeam Plus Transducer That features 20- And 74-Degree cOne Angles operatIng On 200 Khz And 83 kHx frequencies respectively, as Well as a Side-imagIng Sonar With Two 84-Degree beams operatIng at 455 Khz. Th

Transom Mount Transducer. New Design Is More Secure. Less Prone To Kick Up, With Improved Running Angle. Includes 20-Foot Cable And Necessary Mounting Hardware. Built-In Temperature Sensor. 20, 60 And 90 Degree COne Angles OperatIng On 200 Khz, 83 Khz And 455 Khz Frequencies. For HummInbird Models: 1157C, 300 Tx (Tri Beam Only), 400 Tx (Tri Beam Only), 717, 718, 727, 728, 737, 747, 757C, 767, 768, 777C2, 778C, 787C2, 787C2I, 788C, 917C, 931C, 931C DF, 937C, 937C DF, 957, Matrix 35, Matri

Trolling Motor Mount transducers Are Designed To Mount Onto The Body Of Most Trolling MoTors. A Low-Profile Shape reduces Drag In The Water And mInimizes Hang-Ups On weeds; 15 Foot Cable And Hardware Are Included. This Model Will Work With 797C Si.

Trolling Motor Mount transducers Are Designed To Mount Onto The Body Of Most Trolling MoTors. A Low-Profile Shape reduces Drag In The Water And mInimizes Hang-Ups On weeds; 15 Foot Cable And Hardware Are Included. This Model Will Work With 997C Si.

Designed To Mount Onto The Body Of Most Trolling moTors. A Low Profile Shape reduces Drag In The Water And mInimizes Hang-Ups On weeds. 15 ft Cable And Hardware Included. SpecificatiOns: Quad/Tri Beam, 20/60/90 Degrees, 200/83/455 Khz, And Temperature.

Bronze Thru-Hull transducers Are For Large boats And boats With In-Board motors That Make Typical transducers Ineffective. Not Recommended For trailered boats. Professional Installation Recommended. 30 ft Cable And Hardware Included. This Model Will Work With Wide Optic, Portrait, Panorama, Paramount, 300Tx 400Tx, Matrix 35, 37; 737; 575. Optional:(Matrix 67, 87C, 97; 727, 737, 747C, 757C, 767, 777C, 787C).

The Humminbird Plastic Thru Hull Transducer Has Dual/High-Definition Side imaging. This Unit Is For Use With Select Models. It Includes The Transducer, Mounting Hardware And a Product Manual.

The HummInbird XNT 9 Qb 90 Transom Mount Transducer Is a High-Speed Transducer Designed To Mount On The Transom, Or Back, Of The Boat, In Contact With The Surface Of The Water, And Operate In cOnjunctiOn With a Compatible HummInbird Sonar Or Fish Finder System. This Unit Is a QuadraBeam Transducer That features 20-, 60- And 90-Degree cOne Angles operatIng On 200 Kilohertz, 83 Kilohertz, And 455 Kilohertz frequencies respectively.

This Hardware Kit Allows You To Mount And XNT Transducer To Your Transom. This Is Used For a Fixed Mount Application Where You Don't Need The Kick-Up Feature.

Sonar Accessories And Replacement Components. Specifications: Mounting Hardware - New XNT Transducer-Portable

This Hardware Kit adapts HummInbird's Standard Transom Mount transducers In The List Below For Use On The Trolling Motor. Works With XNT 9 20, XNT 9 20 T, XNT 9 Qb 90 T, XNT 9 Qb 90, XNT 9 Si 180 T.

The Ad-926 Transducer Adapter enables Many Current Transducers To Function With older Model fishfinders That No Longer Have Replacement Transducers Available.

The Humminbird Advanced Accessory System Interlink Module shares GPS, Waypoint, And Route Information Between Two Network Capable Plotter Or Combination units. The units May Be Daisy-chained To Allow For Systems With More Than Two Plotters. The Interlink Module Does Not Pass fishfinder Data Between units.

Ice Transducer For 343C And 383C Portable unIts. This Transducer Is Single Or Dual Beam And features 20- And 60-Degree cone Angles; It Also Includes An 8 Foot csble. This Transducer Is Not Compatible With Down Imaging Products.

Humminbird MHX XNT Transom Mount Transducer Hardware, For Use With XNT 9 20 T, 9 Qb 90 T, 9 Si 180 T, 9 Qb 90, 9 20 Transducers. Includes a Kick Up Bracket. We Do Not recommend The Use Of a High Speed Driver When Fastening The Bolt And nylock Washer.

Single/Dual Beam, 20/60 Degree, 200/83 Kilohertz, 20 Foot Cable. More Secure, especially at High Force Of waves. Improved Running Angle And An Optional Lock Down Screw To Override The Kick Up.

Portable Conversion kits Provide a Rugged Protective Case With Internal Battery compartments And All The Hardware Needed To Convert Your existing Transducer To Portable Operation. This Unit Will Work With All Matrix Units(Except 97), 500 Series.

Soft Sided Portable Case. Does Not Include Battery Or Charger.

7-Amp Hour AGM Battery For Use With Humminbird PTC U Or PTC UNB Soft Sided Portable Cases. Works With 343C Portable And 383C Portable.

7-Amp Hour AGM Battery And Wall Charger For Use With Humminbird PTC U Or PTC UNB Soft Sided Portable Cases.

Tough Stretch Neoprene Covers, Or Hard Plastic Covers protects Your Humminbird During Transport And Storage

Kit Allows In-Dash Mounting Of All 900 Series Products. Requires An Opening Of 10-1/16 Inches W X 4-15/16 Inches H.

Replacement Mounting Bracket For Your Fishin' Buddy. Works With All Humminbird Fishin' Buddy's

Take Your Fishin' Buddy Fly Fishing With This Float Tube Strap. Easily Attaches To Most Float Tubes.

The Bbc 1 Buddying Carrying Case Is Not Compatible With older Models Of Bottomline produced FIshin' Buddies. For Use With 140C FIshin' Buddy 130 FIshin' Buddy 120 FIshin' Buddy 110 FIshin' Buddy

The HummInbird AS SIDB Y Side Image Splitter Cable Allows Use Of Two Transducers On One Unit Without The Use Of a Transducer Switch. For Use With Side ImagIng Products Only, In cOnjunctiOn With a Dual Beam Transducer Only.

In-Dash Mounting kits Let You Panel Mount Your HummInbird For a Fully Integrated Appearance. Made Of The Same Rugged materials as The Unit And Includes All Mounting Hardware. Works With All 700 Series.