Holds Parallel Limb Bows, Lockable And Airline Approved, Thick Wall Construction With patented Pillarlock* System, High Density Foam, Arrow Storage Under Lid. Dimensions: 43.25"L X 19"W X 6.75"H

The Plano 1111 Lockable Case features Thick Wall Construction With Structural Pillar Support For Extra Protection. The High-Density Foam And Velcro straps Holds Your Bow Securely In Place. Arrow Storage Provided For Both Aluminum And Carbon Arrows. 49" � 19.5" � 6.5" Oversize.(14 Lb. 4.3 Cu. ft.)

Designed To safely Store & Transport smaller-Sized Bows, including The Original Genesis Bow And The Mission Craze, features Tie-Down straps, Arrow Holders, Dense Foam Padding, And The Crush-Proof 'PillarLock' System, Dimensions: Exterior-- 41" X 15" X 4.75", Interior--39.625" X 11.5" X 4.1875".

Efficiently sTores Up To 28 arrows And features Removable dividers That Allow You To Customize Additional Storage For broadheads, releases, Etc, Designed To conveniently Fit Into The Front Pocket Of Most Soft-Sided Bow Cases (including Plano #'s 93370 & 93375), Includes broadhead Box & Accessory Box, Dimensions: Exterior--36.375" X 7.5" X 3.1875" / Interior--35.625" X 2.75".

Designed to safely store and transport smaller sized bows the SE 44 features tie-down straps, foam arrow holders, dense foam padding and Plano's patented crush-proof PillarLock system.

Compact crossbow case designed to fit newer crossbow designs. Features three heavy-duty latches and balanced carry handles. Allows storage for most quivers in the base of the case and includes lashing straps to secure the crossbow. Interior Dimensions: 39”L x 27”W x 12”H.

Designed for the bowhunter in mind with so many features. So much storage in this one case. Has a large 3/4 zipper to access the entire inside contents. Bow side has built in padded Neoprene pocket that secures bow cams and secure bow with adjustable straps and other side gives you four separate zippered see-thru pockets. Front of case has three zippered accessory pockets along with a build in hard sided zippered arrow case that holds quiver with arrows. Back of the case comes with hidden should

Designed for the R26 and R29 models, this heavy-duty, black and grey, soft-sided, padded case is designed to protect your Ravin Crossbow from damage. It can comfortably store a fully-assembled Ravin Crossbow with mounted scope, quiver and arrows for quick, easy use.

The Ravin hard case is designed to protect your Ravin Crossbow from damage due to travel and use in the field. This compact hard shell case can store a fully assembled Ravin Crossbow with mounted scope, quiver and arrows attached. There is also ample room to store extra arrows, rangefinder, binoculars, etc. Constructed of reinforced polymer with cam over latches and a precut soft foam insert.

This heavy duty, soft-sided padded case is designed to protect your Ravin Crossbow from damage. Comfortably stores a fully assembled Ravin Crossbow with mounted scope, quiver and bolts for quick and easy access. Other features include inside and outside pouches to safely store your quiver, binoculars, and other accessories. Heavy duty handles and a backpack-style straps for easy transport.

With an improved design that's LIGHTER, STRONGER, and LESS EXPENSIVE than previous double recurve case models, the new 3i-4217-RC is the ultimate transport solution for 2 recurve bows.

The 3i-3424-12BC iSeries Crossbow Case features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, resistance to UV, solvents, corrosion, fungus and impact damage, four in-line wheels for easy transport and cubed pick-and-pluck style foam which enables users to customize their interior to ensure a precise fit for most crossbows and gear. This case is molded of ultra-high-strength

Stainless steel padlock protector clips

Stainless steel padlock protector clips

The TenPoint Vengent and Viper Crossbow Case is molded from ultra-high strength polypropylene copolymer resin, material specified by the U.S. military for cases and containers. It features a gasketed, water and dust-tight submersible design resistant to UV, solvents, corrosion, fungus, and impact damage. The case features a continuous molded-in hinge with stainless steel pins, a patented "trigger release" latch system, and a comfortable, snap-down, rubber over-molded handles.

The TenPoint Vapor Crossbow Case is molded from ultra-high-strength polypropylene copolymer resin, material specified by the U.S. military for cases and containers. It features a gasketed, water and dust-tight submersible design resistant to UV, solvents, corrosion, fungus, and impact damage. The case features a continuous molded-in hinge with stainless steel pins, a patented "trigger release" latch system, and a comfortable, snap-down, rubber over-molded handles.

iSeries TenPoint Havoc Crossbow Case provides features and protection to confidently transport Havoc RS440 and Siege RS410 crossbows. This mil-standard waterproof case is molded from ultra-high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design that resists corrosion and impact damage. Features include a molded-in-hinge, patented latch system, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve, and i

Crafted to SKB's exacting iSeries standards, this case is molded from high-strength polypropylene copolymer resin, delivering unparalleled protection against water, dust, and impact as per MIL-STD 810G. It is designed to be submersible and combat the forces of nature, resistant to UV light, solvents, corrosion, and fungus.

"SKB iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin

The iSeries 3019-12 Mission Sub-1 Crossbow Case is an injection molded, watertight case featuring a custom cut high density foam to fit a Sub-1 Crossbow, quiver, and accessories, along with wheels and a tow handle for easy transport. Interior Dimensions: 30.00" L x 19.50" W x 12.00" D.

Rugged Soft Case That Is Made Of a Water Resistant 600 Denier Ballistic Nylon Exterior. It accommodates a wider Style Bow Such as The MaThews Z7 And Z9 Bows With The Quiver Attached. Inside dimentions Are 41 In. X 17 In. X 5 In. It Weighs 15 Lbs. It Also Has a uncondItional Lifetime Warranty.

Injection molded;Watertight;Custom foam insert

Injection Molded Parallel Limb Bow Case That features a Custom Foam Insert For Secure posItionIng Of Your Gear. It Has a Cut Out Arrow Compartment That Will Accommodate a Dozen Arrows. It Has The ATA 300 Locks And Has a uncondItional Lifetime Warranty Along With a Fifteen Hundred Dollar Content Replacement Coverage. Weight Is 20 Lbs. And Inside easements Are 39 In. X 13.5 In. X 6 In.

Smaller version of the SKB Hybrid case designed to fit shorter axle to axle bows. Made from rugged, weather resistant 600 Denier ballistic nylon.

Injection molded watertight double bow case features a rigid foam bunk-bed system for secure storage of two parallel limb bows or a combination of a bow and a rifle. Includes inline skate wheels, reinforced padlock holes, and three cushioned carrying handles. Comes with a lifetime warranty and content coverage for gear damaged by an airline.

Injection molded watertight parallel limb bow case features a custom foam insert for secure positioning of your gear and padded protection.

Injection molded watertight double bow case features a rigid foam bunk-bed system for secure storage of two parallel limb bows or a combination of a bow and a rifle.

The New, larger Hunter Xl Series Case Designed For Parallel Limb Bows Like The MaThews Z7 & Z9 Bows. Inside dimensions Are 41" X 17" X 6". Designed To Hold Bows With Quiver Attached And features a Shaped ABS Exterior, Plush Lined EPS Interior, Foam Arrow System And Lockable Draw-Bolt latches.

This Case Is ATA Approved (Specification 300), Category 1 Rated With Molded-In Bumper Protection, TSA Recognized And Accepted unbreakable Fiberglass Reinforced Trigger Release latches And Locks. Accommodates Most Parallel Limb Bows Complete With quivers, Sight, And Stabilizer. (See SKB Website For Exact Model Compatibility)

Injection Molded Watertight Case constructed Of Ultra High-Strength Polypropylene Copolymer Resin, "Trigger Release" Latch System, Comfortable Snap-Down Rubber Over-Molded Cushion Grip Handles, Automatic Pressure Equalization Valve Contribute To This Military Grade Design, Two Built-In TSA Locks, In-Line Skate Style Wheels, features a Custom Foam Insert And a Foam Arrow System That Holds Up To a Dozen Arrows, Under 20Lbs. Empty, cOvered By SKB's 'Million Mile Guarantee (Lifetime Warranty) And Th

Watertight Injection Molded Double Bow/Rifle Case constructed Of Ultra High-Strength Polypropylene Copolymer Resin, features a gasketed Waterproof/dustproOf Submersible Design That Is Resistant To Corrosion And Impact Damage, accommodates 2 Bow Or 2 Rifle, Or Bow/Rifle Combo, Bunk-Bed Storage With Rigid Foam Divider, Molded-In Hinges With Stainless Steel Hinge pIns, Four "Trigger Release" latches, Four Reinforced Padlock locations For a Customer supplied Lock, Comfortable Snap-Down Rubber Over-M

Junior Padded bowcase With An Accessory Pocket And An Arrow Pocket, 36 inches X 15 inches, Black.

Soft Sided, 41" bowcase features One Arrow Pocket, One 8" � 6" � 1" Utility Pocket With a Plastic Accessory Box To Hold vanes, nocks, inserts And One 10" � 5" � Flat Internal Pocket. Mossy Oak Break-Up.

Designed for optimal protection and durability, the Blazer soft case is built with everything you need to protect and transport your crossbow. Lightweight and rugged, the water-resistant case features a foam-padded interior with a hook and loop strap to secure the crossbow during travel, as well as two external zippered pockets and one internal zippered pocket for accessory storage. Its side-mounted rubber grip handle and top nylon handle provide easy transportation and storage. In addition, the

Designed for maximum protection and durability, these rigid, water-resistant cases feature an extremely durable shell, as well as a velvet interior for added protection. The interior of the case includes two hook and loop straps to secure the crossbow during travel, and storage for a quiver that also includes straps. An integrated stirrup pass-thru with storm flap allows you to hang the crossbow, in the case, for easy storage. Fits TenPoint Nitro X, Stealth NXT and Shadow NXT. Exterior dimension

"A compound bow case designed to fit bows up to 37-inches. Features a large quiver pocket. Measures 38""L x 18.5""H x 4""D."