4° Wedge for Under Vision Mounting PlateWhile underway the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 68810 4 degree Wedge for under Vision Mounting Plates the elevated bow will be offset aligning your radar to see better. Edson's 4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount. Order Base Mount and Mounting Plate separately. Specifications5.313" x 5.063"3" Inner Diameter

EC3 Elite Carbon 13" ComfortGrip PowerWheel - Carbon Fiber - 3-Spoke13" Carbon 3-SpokeYou have your hands on your wheel more than any other part of your boat - so don’t settle for anything but the best! Edson PowerWheels™ feature a classic design blended with contemporary styling and are one of the best ways to upgrade the look and feel of your boat.Features:Built from Marine Grade 316 Stainless or Cast BronzeClassic Tri-Spoke Design looks great on any boat.One piece casting

Stainless Replacement Brake KnobEdson’s Stainless Replacement Brake Knob can be easily retrofitted onto your older Edson Pedestal with side-mount brake. Easy press-on installation requires no tools.NOT FOR THROUGH SHAFT WHEEL BRAKES.

Superlube® Conduit & Bearing Lubicrant - 14ozSuperlube® is a Teflon® grease for use in all Edson Systems. Ideal for both conduit and needle bearing use

Stern Rail Outboard Aluminum Motor Mount f/1-1/4" RailingsBuilt to hold motors up to 100lbs/45 kg (about 15 hp). Convenient cleat and side handles allow you to tie the motor and lock it safely on board. The non-corroding polished 316 stainless bracket with non-skid pad, bolted to the UV stable poly backing board always looks ship-shape… no more varnishing. Comes complete with hardware to attach to any 1-1/4” (3.2cm) stainless rail. Bottom cleat comes unattached so that it will f

Leather Shackle PullsWhen hands are cold, tired and wet, sometimes they need a little assistance with stubborn snap shackles and sticky zippers. Edson’s custom-cut “whale tail” Dove Gray Leather Shackle Pulls are durable and the “whale tail” prevents them from coming undone. Attach them to anything you need to get your hands on quickly. Snap shackles and blocks, zippers on your foul weather gear, luggage zippers, cushion zippers, quick-release pins - you name it and

Clamp-On Drink Holder - Single - TeakAdd an elegant touch to your boat with Edson's Teak Base Stainless Drink Holder, with the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features: Clamp-on to 1", 1-1/8" and 1-1/4" pipesTeak comes unvarnished (in order for you to match the teak on your boat)

Clamp-On Drink Holder - Single - White PolyEdson's White Poly Base Stainless Drink Holder will add an elegant touch to your boat! It has the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features:Clamp-on to 1", 1-1/8" and 1-1/4" pipes

Clamp-On Drink Holder - Double - TeakAdd an elegant touch to your boat with Edson's Teak Base Stainless Drink Holder, with the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features:Clamp-on to 1", 1-1/8" and 1-1/4" pipesTeak comes unvarnished (in order for you to match the teak on your boat)

Clamp-On Drink Holder - Double - White PolyEdson's White Poly Base Stainless Drink Holder will add an elegant touch to your boat! It has the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features:Clamp-on to 1", 1-1/8" and 1-1/4" pipes

Leather Spreader Boots Kit - LargeMariners have been using leather for centuries to prevent premature wear of their sails. Leather will easily outlast and outperform materials of lesser quality, like rubber or tape, when exposed to sun and salt in the harsh marine environment. Edson’s custom-cut, hand-stitched Leather Spreader Boots will protect your sails from costly tears and chafe, providing you peace of mind at sea and leaving more money in your pocket. Each kit includes two pre-punche

Leather Spreader Boots Kit - MediumMariners have been using leather for centuries to prevent premature wear of their sails. Leather will easily outlast and outperform materials of lesser quality, like rubber or tape, when exposed to sun and salt in the harsh marine environment. Edson’s custom-cut, hand-stitched Leather Spreader Boots will protect your sails from costly tears and chafe, providing you peace of mind at sea and leaving more money in your pocket. Each kit includes two pre-punch

Leather Turnbuckle Covers - LargeEdson’s Leather Turnbuckle Covers add a distinctive look while protecting your lines and sails from premature wear. These high quality turnbuckle covers will not crack or deteriorate like plastic and offer more complete coverage, are better looking and longer lasting than tape. Add the look and feel that only comes with leather. Available in Dove Gray, they are attached and removed easily with pre-fastened, industrial grade hood-and-loop strips. Sold indivi

Leather Turnbuckle Covers - MediumEdson’s Leather Turnbuckle Covers add a distinctive look while protecting your lines and sails from premature wear. These high quality turnbuckle covers will not crack or deteriorate like plastic and offer more complete coverage, are better looking and longer lasting than tape. Add the look and feel that only comes with leather. Available in Dove Gray, they are attached and removed easily with pre-fastened, industrial grade hood-and-loop strips. Sold indiv

Leather Turnbuckle Covers - SmallEdson’s Leather Turnbuckle Covers add a distinctive look while protecting your lines and sails from premature wear. These high quality turnbuckle covers will not crack or deteriorate like plastic and offer more complete coverage, are better looking and longer lasting than tape. Add the look and feel that only comes with leather. Available in Dove Gray, they are attached and removed easily with pre-fastened, industrial grade hood-and-loop strips. Sold indivi

"Special Ops" Powerwheel - Black w/Black Nut & KnobEdson's Special Ops ComfortGrip PowerWheel is finished in a rugged durable black finish. The Special Ops wheel was designed specifically for hard working mariners patrolling the waterways in agency or work vessels - but is just as at home on a custom flats skiff in the Florida Keys or a center console chasing stripers! This Edson Special Ops Wheel  comes with a non-reflective black powder-coated wheel nut as well as the Sportsman P

Satin Finish ComfortGrip Powerwheel - 13" w/Knob & NutWe’ve given our classic tri-spoke ComfortGrip PowerWheel a Satin finish that is silky-smooth but without the bright glare of polished stainless. This comes with the Pro-Series PowerKnob so you also get the ultimate control. Includes Stainless Wheel Nut with inserts for 12mm & 5/8”-18 threads.Features:13" DiameterComfortGrip paddingSolid cast 316 stainless constructionSatin Stainless Steel FinishIncludes 316 1" Stainle

Satin Finish ComfortGrip Powerwheel - 14.5" w/Knob & NutWe’ve given our classic tri-spoke ComfortGrip PowerWheel a Satin finish that is silky-smooth but without the bright glare of polished stainless. This comes with the Pro-Series PowerKnob so you also get the ultimate control. Includes Stainless Wheel Nut with inserts for 12mm & 5/8”-18 threads.Features:14.5" DiameterComfortGrip paddingSolid cast 316 stainless constructionSatin Stainless Steel FinishIncludes 316 1" Sta

13" SS ComfortGrip PowerWheel Steering Wheel - Polished - Fits 3/4" Tapered ShaftThe perfect combination of durability, good looks and soft feel!  Edson’s ComfortGrip PowerWheels feature a unique rubber finger grip insert that provides precise control and ultimate comfort.  And with the optional Pro-Series or ComfortGrip PowerKnob, you also get the ultimate in control. Includes Stainless Wheel Nut with inserts for 12mm & 5/8”-18 threads Features:13" DiameterComfort

Pipe to Fold-Down Adapter 3-1/2" MastEdson's Fold-Down Adapter 3-1/2" Radar Masts attaches to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. By using a992-35 Pivot Bracket (sold separately) and Fold-Down Adapter with your Standard Radar Mast, you can also mount your radar on a raked transom or coaming side.  Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surfa

Pivot Bracket with Backing PlateEdson's Pivot Bracket attaches to Edson's Fold-Down Adapter for Radar Masts (990-23 2-3/8" Mast & 990-35 3-1/2" Mast) (sold separately) that is secured to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and aft.

Vision Series Mounting Plate for Raymarine T300 & T400 Thermal Cameras and Flir M-Series- Year 2017 and NewerWith Edson's Vision Series Mounting System once you have selected the mount you want to install your electronics to you must select the corresponding plate that has the correct bolt pattern for your electronics. Edson's 68600 Vision Series Mounting Plate is designed for Year 2017 and NEWER Raymarine T300 & T400 fixed Mount Pan/Tilt Thermal Cameras and FLIR M-Series (M-324XP, M-625

Stainless Steel Pedestal Guard Mounting Feet - PairEdson Pedestal Guard Mounting Feet are available in pairs as a direct replacement for Edson’s black plastic feet. Gasket and bushing allow for mounting 1”, 1-1/8” or 1-1/4” guard pipes. Nuts and washers included.

Pedestal Rebuild KitBring new life to your older Edson Pedestal with this complete Rebuild Kit. Edson's Pedestal Rebuild Kit replaces all of the important moving parts that will make your Pedestal run smoothly again! Kit Includes:(2) Needle Bearings(2) Snap Rings(3) Shaft Keys(1) Shaft Washer(2) Nylon Washers(1) O-Ring(1) Drive Pin(1) Teflon Grease  (1) Threadlock(1) Pedestal Maintenance Guide

Brake Maintenance KitJust like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again.Kit Includes:(2) Bronze Brake Legs with Brake Pads(1) Cotter Pin(1) Stainless Steel Washer(1) Nylon Bushing (1) Removal & Installation Instructions

Stainless Steel Wheel Nut - 1"-14 Shaft ThreadsAttention to detail is the keynote of these Edson Wheel Nuts. Highly polished Investment Cast 316 Stainless has superior strength as well as good looks. Measure your steering shaft thread for the correct size. Features:1-inch - 14 Shaft Threads.Fits Edson Pedestal Shafts built between 1979 to 1999.Cast 316 Stainless Steel.Polished to a mirror finish

Compass/Instrument Housing CoverEdson’s Compass and Instrument Cover protects your compass or pod mounted instruments. The cover is made of sun-resistant white vinyl laminate with a Velcro tie.

Horizontal Rail Accessory Mount - 3" DiskEdson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 3" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay.Designed to attach to all 1”, 1-1/8” and 1-1/4” pedestal guard tubes by clamping the two pieces together around the guard tube without the need for removal of the tubes or any

Horizontal Rail Accessory Mount - 5" DiskEdson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 5" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay.Designed to attach to all 1”, 1-1/8” and 1-1/4” pedestal guard tubes by clamping the two pieces together around the guard tube without the need for removal of the tubes or any exist

3" Stainless Clamp-On Accessory MountEdson's 3" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.  For angled guards, they rotate and lock in place with set screws so you can mount your drink holder level or adjust the angle of your instrument. Highly polished solid 316 Stainless construction with adapter sleeves for 1", 1-1/8" and1-1/4" guard pipes.

7" Stainless Clamp-On Accessory Mount Edson's 7" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard.  For angled guards, they rotate and lock in place with set screws so you can mount your drink holder level or adjust the angle of your instrument. Highly polished solid 316 Stainless construction with adapter sleeves for 1", 1-1/8" and 1-1/4" guard pipes.

Molded Compass Cylinder - WhiteEdson’s Compass Cylinders are distinctive, non-reflecting, and virtually indestructible. Great for new boats or upgrading your existing pedestal to a larger, easier to read compass. Fits Edson’s 335 and 336 pedestals, stands 5-1⁄2” high and accommodates flush mounted compasses up to a 6-7⁄8” flange diameter.

Single Stainless Steel Drink Holder - Vertical MountEdson Single Stainless Drink Holder - Vertical Mount is great for mounting to the side of your bulkhead, center console or any vertical location on your boat! With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place.

Stainless Clutch HandleUpgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fwd-Rev”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: These handles are only for Edson's Dual Lever Engine Controls. Older pedestals (pre-1980) with 10-32 set screw threads must be retapped to 1/4"-28 in order to accept the mounting screws supplied with these handles.

Stainless Throttle HandleUpgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fast-Slow”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: These handles are only for Edson's Dual Lever Engine Controls. Older pedestals (pre-1980) with 10-32 set screw threads must be retapped to 1/4"-28 in order to accept the mounting screws supplied with these handles. 

Fold-Down Adapter 2-3/8" MastThis Fold Down adapter attaches to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. By using a 992-35 Pivot Bracket (sold separately) and Fold-Down Adapter with your Standard Radar Mast, you can also mount your radar on a raked transom or coaming side.  Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and

Hardware Kit for Luncheon Table - Clamp StyleEdson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete with instructions and stainless hardware. Clamps are built to accommodate 1", 1-1/8", and 1-1/4" guard pipe diameters.

Hardware Kit for Drop Leaf Table - Clamp StyleEdson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete with instructions and stainless hardware. Includes 4 stainless table hinges not shown in photo. Clamps are built to accommodate 1", 1-1/8", and 1-1/4" guard pipe diameters.

Top Support Bracket - Rail Mount 1" Rail - 2-3/8" MastWith Edson's Rail Support Bracket for 2-3/8" Standard Radar Mast - 1-inch Railing is designed to give any Edson 2-3/8” Radar Pole more support, comes complete with two Stainless Steel U-Bolts and two Starboard Rail Mount Brackets to provide a secure, rattle-free installation. Must be mounted within 1” of the railing. This Surface Mount gives you the ability to support the mast against a bulkhead, cabin side or vertical transom.

A200 Class A AIS TransceiverThe A200 Class A is both SOLAS and Inland Waterway certified and offers superior performance through its advanced, next-gen technology. The A200 has been engineered for even the harshest marine environments, undergoing extensive testing by independent experts to ensure it is waterproof and unaffected by extreme temperatures, shock, and vibration so you don't need to worry about reliability issues impacting performance or longevity.The A200 is easy to install and will