Heavy-Duty 2" Hourmeter (Digital) (12-32VDC) Black - Packaged in BoxFeatures:Hole Size: 2"Anti-scratch, flat glass lensCorrosion resistance for a long lifeColor: BlackDigital Hourmeter

Sender 0-80PSI/240-33OHMFeatures:0-80PSI240-33OHM

Temp Sender - TemperatureFeatures:Transmitter Temp.NSN #6685-00-814-5271

Resistor 24V In 12V Out Adapter - 120 OhmFeatures:24V In12V Out120 Ohm

2" Voltmeter (10-16 VDC) Unlit 12V Black w/Stainless Steel Bezel & Orange Pointer - Case of 24Voltmeter Hole Size: 2" - Hole Size: 2.0625" (53mm)A voltmeter indicates the battery voltage and the general condition of the battery charging system. The meter requires no warm-up and indicates voltage changes instantly. Features:2"Case of 2410-16 VDCBlackStainless Steel BezelOrange Pointer

Euro Black 4" Speedometer 60MPH -GPS4" - Hole Size: 3.375" (85mm)A drop in replacement for your current speedometer to match your existing instrument dash.GPS information is gathered from an internal GPS antenna. No external antenna required. The GPS Speedometer uses a highly accurate 48 channel GPS receiver. Speed data is shown by an analog pointer. This pointer is driven by a digital stepper motor for increased accuracy and minimized pointer bounce during vessel operation. Euro Black Seri

5" Tachometer/Digital Hourmeter Gauge Chesapeake White with Stainless Steel Bezel - BulkElectronic tachometers work by counting pulses generated by the ingition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of hte signal sources listed above.By selecting the right tach and setting the switch on the back to the correct postion you let the tachometer know how many pulses are sent per each engine revolution.Features:5" - Hole Si

Oil Pressure Sender 1/8" NPTEngines or transmissions equipped with a low oil pressure switch that activates a warning light require an appropriate “T” pipe fitting to accommodate both pressure sender and warning light.Most oil pressure sending units have 1/8” NPT pipe threads and are usually mounted in the engine’s block. If the block or transmission case has a larger pipe size, an appropriate bushing may be used without affecting pressure- sensing accuracy.

Oil Pressure Sender (1/8 NPTF European 10 Bar) - Single StandardPerfect replacement or upgrade to your boat.Features:Single Standard

2" Tachometer Variable Frequency 4000 RPM Gauge - Black - Bulk PackagingHole Size: 2"Perimeter-lighted black dial with bold white graphics, black aluminum SAE style bezel, contoured white pointer and flat glass lens.Electronic tachometers work by counting pulses generated by the ingition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12vDC, Ground and one of hte signal sources listed above.By selecting the right tach and setting the switch on

0-100 PSI Pressure SenderFaria's 0-100 PSI Pressure SenderFeatures:RuggedReliableInnovative

A 3-Pin Connector *Bulk Case of 100 Pieces*Features:3-PinConnector*Bulk Case of 100 Pieces

Ammeter - White with Stainless Steel BezelAn ammeter indicates the current flow through the battery charging system. A "zero center" ammeter, during chargine, shows a (+) positive reading indicating the current is flowing to the battery (charge). A (-) negative reading indicates current flowing away from the battery (discharge). Faria Performance Tips:Wiring - Due to the high current loads present in many ammeter applications, ammeters must be wired with wire not lighter than 10 AWG approve

Newport SS 5" Tachometer for Gas Inboard - 6000 RPMThe Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.  Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night. Features:Perimeter lighted Retro White DialBlack and Gray Graphics Domed fog resistant lens Two-piece Black pointers H

Newport SS Inboard/Outboard 6 Gauge Box SetThe Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.  Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night. Features:Perimeter lighted Retro White DialBlack and Gray Graphics Domed fog resistant lens Two-piece Black pointers Hand-poli

Newport SS Outboard 4 Gauge Box SetThe Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.  Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations.  Perimeter lighting makes reading these gauges easy to read Day/Night. Features:Perimeter lighted Retro White DialBlack and Gray Graphics Domed fog resistant lens Two-piece Black pointers Hand-polished Sta

Replacement Bulb for 2" Gauges - Blue - 2 PackReplacement bulb for 2" Faria gauges.Specifications:Size - T1-14*Sold as an individual

Replacement Bulb for 4" Gauges - Blue - 2 PackReplacement bulb for 4" and 5" Faria gauges.Specifications:Size - T3-1/4*Sold as an individual

2" Gauge Weather Cover - WhiteProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 2" Gauges. Available in 2", 4" or 5" size and in Black or White.*Sold as an Individual

4" Gauge Weather Cover - WhiteProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 4" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as an Individual

5" Gauge Weather Cover - WhiteProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 5" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as an Individual

2" Gauge Weather Cover - BlackProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 2" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as an Individual

4" Gauge Weather Cover - BlackProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 4" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as an Individual

5" Gauge Weather Cover - BlackProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 5" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as an Individual

2" Gauge Weather Cover - White - 3 PackProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 2" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as a Three (3) Pack

2" Gauge Weather Cover - Black - 3 PackProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 2" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as a Three (3) Pack

4" Gauge Weather Cover - White - 3 PackProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 4" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as a Three (3) Pack

4" Gauge Weather Cover - Black - 3 PackProtect your gauges from fading, scratches and the sun when not in use.  This protective cover fits snugly over the gauge to ensure your gauge looks as good as when you got it.Compatible with all Faria 4" Gauges.Available in 2", 4" or 5" size and in Black or White.*Sold as a Three (3) Pack

Professional Red 2" Trim Gauge for Cobra/VolvoThe Faria Beede Professional Red features a perimeter-lighted Black dial with stylish Red and White graphics, Black aluminum bezel, tear-drop White pointer and flat glass lens.2"- Hole Size: 2.0625" (53mm)For Engine Types:(OMC Cobra (1993-1994) / Volvo SX (MD models only))Specifications:Flat Glass Anti-fog, Scratch Resistant LensBlack Aluminum BezelLED Illuminating around the Perimeter of the DialWhite Tear Drop PointerFactory P/N GP7356*Sold as an I

Coral 2" Hourmeter (Digital)Perimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer and flat glass lens.Hourmeter operates by applying battery voltage across the gauge's register motor to ground.  The register increments increase when the key switch in on.  Route power through a normally open Oil Pressure switch to count "engine running" hours. 2" - Hole Size: 2.0625" (53mm)Specifications:Scratch

Coral 2" Battery Condition Indicator GaugePerimeter-lighted Black dial with stylish White and Blue graphics, Black aluminum bezel with burnished leading edge, contoured White pointer, and flat glass lens.A battery condition gauge monitors the state of charge of a 12 volt battery, indicating a dead battery and a charging battery and everything in between.  It is connected to the positive terminal (positive stud) and negative terminal (ground stud) of the battery to be monitored.2" - Hole Siz

ETERM-C Vessel Monitoring System Power HarnessReplacement or additional 6" power harness for Faria ETERM-C VMS system.Features:6" in lengthIncludes all connectionsInstruction Manual*Sold as an Individual 

ETERM-C Vessel Monitoring System Mounting BracketReplacement or additional Mounting Bracket for Faria ETERM-C VMS system.Features:Includes mounting hardwareInstruction Manual*Sold as an Individual

Euro Black 4" Tachometer with Hourmeter (4000 RPM) (Diesel) (Magnetic Pick-Up)Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.Electronic tachometers work by counting pulses generated by the ingition system, alternator, tach signal generator or magnetic pickup sender. The tach is hooked up to +12VDC, Ground and one of the signal sources listed above.By selecting the right tach and setting the switch on the back to the correc

Temp Sender - 1/2" American Single StandardFeatures:The universal sending unit for most gauges and instrumentsTemp Sender, 1/2" American Single Standard

Temp Sender 3/8" NPTF America Single StandardFeatures:3/8 NPT 100/250 oF - 460/29.5 ohmsSingle wire

Sender Temperature 1/8 - European Single StandardThe Faria Beede single-station standard earth temperature sender is European resistance and suitable for use with the European range of Faria Beede oil temperature and water temperature gauges.

Oil Pressure Sender 1/8 NPTF America 80 PSI Dual Station StandardEngine oil pressure sending unit sends a reading from 0-80 PSI to the oil pressure gauge.

Sender Fuel Level (American 8"-16") (Single)Features:8 to 16 in. Fuel Level Sending Unit8 in. to 16 in. tank depthSingle stationFor use with US OHM scale gauges

3-Pin Connector - Bulk Case of 500 Pieces*Sold as an Individual