Series 19 I-Beam Car - Channel Top - 51mm(2")Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation.Applications:Mainsheet and self-tacking jib travellers on dinghies and catamaransMaterials:Black Chromed Grade 316 stainless steel car bodiesGrade 316 stainless steel wheels and fixturesSpecifications:Length: 51.0mm(2")M.W.L.: 250kg(550lbs)B. L.: 650kg(1,430lbs)Weight: 140g(4.9oz)

Series 19 I-Beam Car - Adjustable Track Stop - Spring Loaded - 25mm(1")Track Fastenings: To suit 5mm(3/16") countersunk fasteners at 100mm(3-15/16") centres.Stop Holes: - 50mm (1-31/32") centres.Track is supplied with RC7250-INS insulating inserts to eliminate corrosion between track and fasteners Minimum Curve RadiusFor 51mm(2") car Min horizontal 'A' curve radius = 400mm (15-3/4"). Min horizontal 'B' curve radius = 400mm (15-3/4").For 86mm (3-3/8") car Min horizontal 'A' curve radius = 1200mm

Series 32 I-Beam Car - Saddle Top - Rubber Stand-Up Pad - 76mm(3")Strong, stainless steel bodies with flared sides and angled ball bearing wheels provide high load capacity and smooth operation.Applications:Mainsheet and self-tacking jib travellers on boats to 9m (28ft)Materials:Black Chromed Grade 316 stainless steel car bodiesGrade 316 stainless steel wheels and fixturesSpecifications:Length: 76mm(3")M.W.L.: 650kg(1,430lbs)B. L.: 2,000kg(4,400lbs)Weight: 320g(11.3oz)

Series 25 T-Track - Track End Cap - Black'Racing' track has 25mm(63/64") stop hole spacing for even more precise control of the car position and sheeting angle. Track Fastenings:5mm (3/16") countersunk fasteners at 100mm (3-15/16") centresMaterials:Anodized alluminum alloy track

Series 19 C-Track Slide - w/Swiveling Dead Eye - Cam Cleat - Spring-Loaded Track StopFeatures:Spring-loaded plunger pins for fast, positive positioningSwivelling cleat fairleads to suit different crew positionsApplications:Dinghy and small catamaran jib sheet leadsAdjustable hiking strap systemsMaterials:Chrome plated brass slidesSpecifications:Length: 65mm(2-9/16")Weight: 185g(6.5oz)

Race Sheave - Acetal Ball Bearing - 38mm(1-1/2") ODPrecision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.Acetal Sheaves:Choice of bearingsAcetal ball bearings - minimum friction under moderate loadsU.V. resistant Acetal sheaves

Race Sheave - Acetal Brass Bearing - 73mm(2-7/8") ODPrecision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.Acetal Sheaves:Choice of bearingsBrass bearing - for highest load applicationsU.V. resistant Acetal sheaves

Race Sheave - Acetal Ball Bearing - 28mm(1-1/8") ODPrecision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.Acetal Sheaves:Choice of bearingsSolid bearing - high strength and durability, utilizing the self-lubricating properties of AcetalU.V. resistant Acetal sheaves

Series 40 AP Sheave - Acetal Solid Bearing - 40mm(1-9/16")ODPrecision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.Acetal Sheaves:Choice of bearingsSolid bearing - high strength and durability, utilizing the self-lubricating properties of AcetalU.V. resistant Acetal sheaves

Race Sheave - Acetal Ball Bearing - 50mm(1-15/16") ODPrecision moulded Acetal sheaves running on Acetal or Torlon® ball bearings provide high performance & low friction.Acetal Sheaves:Choice of bearingsSolid bearing - high strength and durability, utilizing the self-lubricating properties of AcetalU.V. resistant Acetal sheaves

Wire Block - Tubular Rivet Head w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave DiameterWire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the wire terminationFeatures:Flared cheeks to minimise chafingRemovable sheavesApplications:Wire blocks suit halyards, vang and backstay applicationsMaterials:Grade 316 stainless steel cheeksNylatron® sheaveSpecifications:Sheave Ø: 45mm(1-3/4")Max. Cable Ø: 6mm(1/4")M.W.L:850kg

Wire Block - Ferrule Top w/Removable Nylatron® Sheave - 45mm(1-3/4") Sheave DiamterWire blocks have purpose designed narrow sheaves and grooves.Removal sheave for easy fitting and without cutting the wire terminationFeatures:Flared cheeks to minimise chafingRemovable sheavesApplications:Wire blocks suit halyards, vang and backstay applicationsMaterials:Grade 316 stainless steel cheeksNylatron® sheaveSpecifications:Sheave Ø: 45mm(1-3/4")Max. Cable Ø: 6mm(1/4")M.W.L:850kg(1,870lb

Wire Block w/Removable Clevis Pin Head - Nylatron® Sheave - 25mm(1") Sheave DiameterWire blocks have purpose designed narrow sheaves and grooves.Features:Removable clevis pin headApplications:Wire blocks suit halyards, vang and backstay applicationsMaterials:Grade 316 stainless steel cheeksNylatron® sheaveSpecifications:Sheave Ø: 25mm(1")Max. Cable Ø: 3mm(1/8")M.W.L:450kg(990lbs)B.L.: 900kg(1,980lbs)Weight: 40kg(1.4oz)

Dinghy Wire Block - Ferrule Top w/Removable Nylatron® SheaveWire blocks have purpose designed narrow sheaves and grooves. Removal sheave for easy fitting and without cutting the wire terminationFeatures: Flared Cheeks to minimize chafingRemovable SheavesApplications:Wire blocks suit halyards, vang and backstay applicationsMaterials:Grade 316 stainless steel cheeksNylatron® sheaveSpecifications:Sheave Ø: 25mm(1")Max. Cable Ø: 3mm(1/8")M.W.L:450kg(990lbs)B.L.: 900kg(1,980lbs)Weig

Halyard Shackle - 6.4mm(1/4") PinHalyard Shackles have a lever action for easy opening and closing, with a keyed pin for positive lockingFeatures:High strength to weight ratioGrade 316 stainless steel bodies and pins

Halyard Shackle - 7.9mm(5/16") PinHalyard Shackles have a lever action for easy opening and closing, with a keyed pin for positive lockingFeatures:High strength to weight ratioGrade 316 stainless steel bodies and pins

Standard Dee Shackle - 3.2mm(1/8") PinFeatures:High strength to weight ratioGrade 316 stainless steel bodies and pins

Standard Dee Shackle - 4.0mm(5/32") PinFeatures:High strength to weight ratioGrade 316 stainless steel bodies and pins

Standard Dee Shackle - 6.4mm(1/4") PinFeatures:High strength to weight ratioGrade 316 stainless steel bodies and pins

Boom Hanger - 65mm(2-1/2") Internal Width80mm(3-1/8") long x 65mm(2-1/2") wideMaterial Diameter: 6.4mm(1/4"). Fixing Holes Diameter: 2 x 6.6mm(1/4")Applications:Typically used on dinghies, catamarans and small keelboatsMaterials:Grade 316 stainless steel

Eye Becket - 5mm(3/16") Mounting Hole - Stainless SteelSuits Series 14, 19 ball bearing traveller systemsStainless steel

Narrow Saddle - 18mm(23/32") ClearanceGrade 316 Stainless Steel 60.0mm(2-3/8") screw to screw length

Narrow Saddle - 16mm(5/8") ClearanceGrade 316 Stainless Steel 45.0mm(1-25/32") screw to screw length

Narrow Saddle - 11.4mm(7/16") ClearanceGrade 316 Stainless Steel 37.3mm(1-7/16") screw to screw length

Lightweight Clevis Pin Dee Shackle - 3/16" Pin - 25/32"L x 9/16"WIdeal if split ring security is necessaryGrade 316 Stainless Steel bodies & pins

Shock - 3/16" Line - 1/4" Webbing - Blue - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, bu

Shock - 3/16" Line - 1/4" Webbing - Grey - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, bu

Shock - 3/16" Line - 1/4" Webbing - Red - PairThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but

Shock - 3/8" Line - 3/8" Webbing - BlueThe Sheaveless BlackThe obvious choice for those kitesurfers, paragliders, control line deflections and purchase systems that require a lightweight high load capacity block.Ultimate durabilityWith no moving parts SHOCKS provide ultimate durability and are maintenance free. They are ideal where sand and grit would compromise a bearing system or where regular flushing out isn?t possible. Their gentle 3-dimensional geometry is kind on lines, but is str

Low Friction Ring - 8mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and a deep external groove to retain the rope securely within the large shoulders when spliced into a loop. Features:Compact & lightweight Low friction Large shoulder secure

Low Friction Ring - 11mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and a deep external groove to retain the rope securely within the large shoulders when spliced into a loop. Features:Compact & lightweight Low friction Large shoulder secure

Low Friction Ring - 16mm HoleLow Friction rings can be used as a lightweight alternative to a block in some applications. They are best suited for systems requiring relatively small line deflection angles, or for high static loads. The design achieves a nicely rounded internal profile for smooth control line trim under load, and a deep external groove to retain the rope securely within the large shoulders when spliced into a loop. Features:Compact & lightweight Low friction Large shoulder secure

Splicing KitThese five Selma Fids are all you need to splice different sizes and types of rope or line. Features:Highly polished stainless steel Fid sizes: 4, 5.5, 7.5, 10, and 13 mm Splice double and hollow braided lines from 1/8" to 9/16" Splice three-strand line or twine up to 1-1/8"WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Fairlead - 6.8mm(1/4") ID - BlackFairleads are a simple and economical means of containing, deflecting or correcting the lead angle of control linesImpact resistant, U.V. stablized Nylon

Dyneema® Link f/S40 Double & Triples and S55 Singles & FiddlesFeatures:Made from highest quality SK75 Dyneema® fiber - 10 times stronger and lighter than steelIndividual threads impregnated for U.V. and abrasion resistance - longer lifeSuits RF45201, RF45211, RF45301, RF45311, RF55101,RF55111, RF55501, RF55511,RF55521, RF55531, RF56101, RF56111, RF56121, RF56131

Bolt Through Deck HookBrace hooks are used instead of barber haulers, to hook in the windward spinnaker sheet after gybing.Material:Stainless steel hookNeoprene pad

Single Lead Block - 19mm(3/4") Sheave DiameterLead blocks are a low profile solution for leading halyards or other rig sail controls back to cleats or jammers.Applications:Typically used in dinghy spars for control linesMaterials:U.V. stabilized Acetal sheaveGrade 316 stainless steel load housingSheave Ø: 19mm(3/4")Max. Rope Ø: 8mm(5/16")Fastener Ø: 5.0mm(3/16")M.W.L.: 250kg(550lbs)B. L.: 550kg(1,100lbs)Weight: 20g(0.7oz)

Scissors - Cuts Kevlar & Dyneema® Material - 8"Specially Designed for cutting Kevlar materials. Excellent for cutting Plastic Canvas, Upholstory, Cloth, Fabric, String and many other materials. High Carbon alloy steel with Molybdeum and Vanadium blades, precision hollow ground and hardened for long-lasting edge. Ergonomic modern handles allow for both right and left handed users. Adjustable pivot point allows the blades tension to be modified. One micro-serration blade reduces slippage. Feat

F15 Splicing Needle w/Puller - Small 2mm-4mm(1/16"-5/32") LineA range of specialised rope splicing needles for sailors and riggers.They are specifically designed for use with modern synthetic fibres and ropeconstructions, in particular small line sizes where conventional fids/needles don't work.Features:"Pull-through" operationUnique double needle clamps the line making it easy to pull throughIdeal for making "soft shackles"Ideal for pulling cover plaits into the core for making tapered sheetsSi

F25 Splicing Needle w/Puller - Large 6mm-8mm(1/4"-5/16") LineA range of specialised rope splicing needles for sailors and riggers.They are specifically designed for use with modern synthetic fibres and ropeconstructions, in particular small line sizes where conventional fids/needles don't work.Features:"Pull-through" operationUnique double needle clamps the line making it easy to pull throughIdeal for making "soft shackles"Ideal for pulling cover plaits into the core for making tapered sheetsSiz