Popular Tubular-Style Flask, tastefully Adorned With The Traditions Name. Solid Brass, Heavy-walled, Seamless Cylinder With Threaded Cap For Easy Filling. Holds a Generous Supply Of Black Powder Or Pyrodex. Valve-Type Dispenser With Spout.....See Details

Solid Brass Body carries 15 No.11 Caps Ready For Precise dispensing.....See Details For More Info.

Handy For Field Cleaning. Bronze Brush Is Sturdy For Thorough Cleanings. Cotton Swab Cleans And oils. Threaded For All Traditions And Similar Range rods And ramrods. 10/32 Threaded.....See Details For More Info.

Fits All Traditions Rifles And Pistols. For M6X1 Threads And No.11 Caps. Per 2....See Details For More Info.

Traditions Powder Horn Mfg: Traditions Model: A1252

Mfg: Traditions Model: A1254

Handy For Bench And Field Cleaning. Bronze Brush Is Sturdy For Thorough Cleanings. Threaded For All Traditions And Similar ramrods. 10/32 Threaded.....See Details For More Info.

Traditions Super Mag Pellet Quick Loader Mfg: Traditions Model: A1315

Traditions 5 In 1 T Loader Mfg: Traditions Model: A1316

Traditions Cleaning Pick Mfg: Traditions Model: A1347

Mfg: Traditions Model: A1381

Two Per Pack. Designed To Utilize Musket Percussion Caps For greater Ignition. Fit Traditions In-Line Rifles With M6X1 Threads.....See Details For More Info.

Designed To Hold Twelve 209 Primers. Easy To Use, Just Squeeze Lanyard Loop To remove From Body, Load Primers, And Replace Lanyard Loop. Can Be Used On Most In-Line Muzzleloaders.....See Details For More Info.

Brass Body With Push-Up Slide Extends Nipple Pick at An Angle To Reach In-Line Rifle Nipples.....See Details For More Info.

Mfg: Traditions Model: A1421

EZ Clean™ 2 Cleaning Patches.

Mfg: Traditions Model: A1438

The Unique knurled Head makes It Easy To remove With Just Three rotations. It Incorporates a Built In 209 Holder. Flat Face And Heavy Duty O-Ring Provide Reliable Ignition And Reduced Blow Back. Note: The Accelerator Breech Plug Is Available Only In Pursu

The Unique knurled Head makes It Easy To remove With Just Three rotations. It Incorporates a Built In 209 Holder. Flat Face And Heavy Duty O-Ring Provide Reliable Ignition And Reduced Blow Back. Note: The Accelerator Breech Plug Is Available Only In Pursu

A Steel Wrench That Will remove 209, Musket & #11 Nipples Plus The Breech Plug From Tradition's In-Line Muzzleloaders. Use The End With The larger Opening To remove 209 Nipples And Breech Plugs; Use The End With The smaller Opening To remove #11 & Musket

A Must Have For Any Traditions™ In-Line Muzzleloader. This Universal Wrench Is Dual Sided So No Matter Which Traditions Breech Plug You Have You Will Have The Right Wrench. On One End You Find a Dual Slotted Wrench, On The Other Our Popular Hex Style Wrench. No More Trying To Remember What Breech Plug You Have!

Traditions™ EZ Clean™ 2 Pre-Saturated Cleaning Patches Are Pre-Saturated With An advanced Formula That helps Clean Corrosive Black Powder, Blackhorn 209, Triple Seven, Pyrodex, And Other Black Powder substitutes.

Traditions™ Firearms has changed muzzleloading forever. They've partnered with Federal Premium® and Hodgdon® Powder to make muzzleloading safer more reliable and more consistent. The NEW NitroFire™ muzzleloader is .50 caliber and has a 26” ultralight chromoly steel fluted and tapered barrel 1:28” twist rifling Dual Safety System and much more. The NitroFire™ is also equipped with Traditions™ new Elite XT™ trigger system. The Elite XT™ trigger system is designed with a rebounding hammer a captiv

Universal Mounting System For In-Line Muzzleloaders. CNC-machIned. Full Windage And Elevation Adjustment. Mounting Hardware Included. Front Diameter Is .040"; Rear Diameter Is .029". Endorsed By The Rocky Mountain Elk Foundation.

The 3-Lug Suppressor Mounts are designed around the iconic HK standard. YHM's 3-Lug mount was designed with a 1 3/8-24 thread and can be swapped onto your R9™ or Nitro N20 Sound Suppressors. - Replaces your Direct Thread Adapter - Aluminum and Stainless Steel - Matte Black Finish - 1-3/8”-24 Mount Thread Pitch

Camo DLX Padded 1In RFL Sling Swivels

Single Scoped Rifle Case With 1 1/2" Total Soft Padding, Full-Length Heavy-Duty Zipper With Pull, Durable Extra Heavy-Duty Tetron Water-Resistant outer Shell, Brushed Tricot Soft Scratch-Resistant Inner Lining. 48"

Powder & Primer Storage; Holds 20 Variflame or 209 primers; Holds up to 170 grains of black powder.;Powder and Primer storage;Up to 170 grains;Up to 20 primers;Works with bullets up to .50 caliber

The CVA Paramount ELR Loading Tip features an extended ballistic tip which requires a loading tip with a deeper recess to ensure proper alignment and protect ballistic tip from being crushed during loading. The tip is milled out of brass to ensure the muzzleloader barrel does not get stratched while using the loading tip.

The CVA Palmsaver Ramrod is an aluminum ramrod which simplifies the process of cleaning and loading muzzleloaders. At the end of the rod is a special jag that is threaded. The Palmsaver attaches to the threaded jag and is configured to be left on the gun when firing.

The CVA Palmsaver Ramrod is an aluminum ramrod which simplifies the process of cleaning and loading muzzleloaders. At the end of the rod is a special jag that is threaded. The Palmsaver attaches to the threaded jag and is configured to be left on the gun when firing.

The CVA QRBP Breech Plug is made for use with all loose powder and pelletized muzzleloading propellants. The QRBP makes removing your breech plug and cleaning your muzzleloader a simple process.

The CVA QRBP Breech Plug is made for use with all loose powder and pelletized muzzleloading propellants. The QRBP makes removing your breech plug and cleaning your muzzleloader a simple process.

"Two-brush set designed for in-line rifle maintenance;Large brush for breech area cleaning;Small brush for breech plug clearing;Nylon bristles for effective

Snap on cap replaces blackpowder lid. Eliminates spills as it allows user to visualize pouring.

Two-inch cleaning patches are a perfect fit over a CVA cleaning jag.

Flexibility to bend without breaking. Three foot length for you to custom fit. 11/32” diameter. 10-32 threads.

Straight-through tube allows for loading powder and bullet in one fluid motion. Package of 3.