Cowl Ventilator(0870)Chrome Plated Zinc Alloy Cowl with Black PERKO-KOTE Base3" Duct Thread into Neck, Hose Clamps Not RequiredCowl Opening Square: 7-1/3"

Cowl Ventilator(1312)Chrome Plated Zinc Alloy Cowl w/ Black Plastic Base3" Duct Threads Into Neck, Hose Clamps Not RequiredLength: 5-3/4"Width: 4-3/8"Height: 2-5/8"

Open Base CleatChrome Plated Zinc AlloyLength Overall: 4"Dimensions Base: 2-1/8" x 1-1/2"Max Rope Size: 5/16"

Open Base CleatChrome Plated Zinc AlloyLength Overall: 6"Dimensions Base: 3" x 1-3/4"Max Rope Size: 7/16"

Open Base Cleat(1188)Chrome Plated Zinc AlloyLength Overall: 8"Dimensions Base: 4" x 2-1/8"Max Rope Size: 5/8"

Open Base Cleat(1252)Chrome Plated Zinc AlloyLength Overall: 6-1/2"Dimensions Base: 3" x 1-1/8"Max Rope Size: 3/4"

Straight ChockCast Plated BronzeMax. Rope Size: 3/4"Length Overall: 4"Width: 7/8"

Straight ChockCast Plated BronzeMax. Rope Size: 1"Length Overall: 6"Width: 1-7/8"

Straight Chock(1230)Chrome Plated Zinc AlloyLength Overall: 4"Width: 7/8"Max Rope Size: 3/4"

Rope and Chain Deck Pipe (Chrome)(0750)Chrome PlatedThe Cover Has a Hook for Hanging Chain and Stainless Steel Cable RetainerOpening for Chain Size: 3/8"Dimensions Flange: 5-1/4" x 4"Height Overall: 1-3/8"

Rope Deck Pipe(0757)Chrome Plated Zinc AlloyMax Rope Size 1"O.D. Flange: 3-3/8"

Flush Lock & Latch for Smooth or Carpeted Surfaces Non-locking latch For smooth or carpeted surfaces Stainless Steel "D" Ring Handle Stem and Lock Nut Two O-Rings for Increased Water Resistance Position Indicators Show Open or Closed Position Easily Installs in a 2-3/8 Inch Diameter Hole For Mounting Surfaces 3/8 to 7/8 Inches Thick

Fender LockChrome Plated Zinc AlloyThe eye is to be permanently attached to the fender line

Clam Shell VentilatorChrome Plated Brass - 2" x 2"

Flush PullChrome Plated Zinc AlloyDimmensions: 3-11/16" x 1-11/16"

Flush PullChrome Plated Zinc AlloyBlack Polymer Finishing FlangeSpring Loaded, Can be mounted Horizontally or Vertically

Flush Lifting HandleChrome Plated Zinc AlloyDimensions: 3" x 2-1/4"

Chrome Plated Brass 3/8" Inset HingesFeatures: Semi-Concealed For Inset Doors Chrome Plated Stamped Brass 3/8 Inch Inset

Clam Shell Ventilator - Chrome Plated Brass - 4" x 3-3/4"Specs: Chrome Plated Brass Dimensions Base: 4" x 3-3/4" Width Opening: 2-1/2" Height Opening: 1-5/8" Screw Size: #6

Door Catches - White Nylon/Stainless - PairSpecs: White Polymer Stainless Steel Mounting & Keeper Screws Catch Screw Size: 3/4 x #8 Catch Dimensions: 1-1/4" x 5/8" Mounting Screw Size: 4 R.H.

Door Catches - Black Nylon - PairSpecs: Black Polymer Stud Dimensions: 1-1/8" x 3/8" Catch Dimensions: 1-3/8" x 7/8" Mounting Screw Size: 4 R.H.

Rowlock Socket - BronzeSpecs: Length: 2-3/8" Width: 7/8" Depth: 1" Screw Size: #10

Flush Ring Pull - Chrome Plated ZincSpecs: Chrome Plated Zinc Alloy Face Plate Dimensions: 1-3/4" x 1-3/8" Screw Size: 6

Surface Mount Drawer Pull - Chrome Plated ZincSpecs: Chrome Plated Zinc Alloy Overall Width: 3-7/16" Inside Width: 2-5/16" Screw Size: 6

Surface Mount & Latch - Black Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8"Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180x Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusionSpecs: Face

Surface Mount & Latch - White Body, Chrome Handle, Offset Cam Bar, 3/4" - 2-3/8"Features: Polymer body T Handle Stainless Steel Stem Lock with 2 keys Offset cam bar Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick The T - Handle drops down flush in either the open or closed (180x Rotation) position. (except with the offset cam bar positioned upward) The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusionSpecs: Face

Surface Mount Flush Latch - Offset Cam Bar - 2.5" Hole - WhiteFeatures:White plastic and chrome plated zinc alloyOffset cam barFor surface thickness: 1/8" to 3/4" (0.3cm to 1.9cm)Face plate O.D.:3" (7.6cm)Installs in 2-1/2" (6.4cm) Diameter Hole

Flush Mount Latch - Straight Cam Bar - 2.5" Hole - BlackFeatures:Black plastic and chrome plated zinc alloyStraight cam barFor surface thickness : 1/8" to 3/4"(0.3cm to 1.9cm)Face Plate O.D.: 3" (7.6cm)Installs in 2-1/2" (6.4cm) Diameter Hole

Swivel Eye Hasp - 3" - Chrome PlatedZincFeatures: Chrome Plated Zinc Alloy Padlock eye swivels to act as a latchSpecs: Closed Length: 3" Width: 1" Padlock Clearance: 11/32" Screw Size: 6

North River Type Rowlock Horns - Chrome Plated Zinc - PairSpecs: Finish: Chrome O.D. Shank: 1/2" Shank Length: 1-3/4" Between Horns: 1-3/4"

Round Flush Ring Pull - 2" - Chrome Plated ZincSpecs: Chrome plated zinc alloy Face Plate O.D.: 2" Screw Size: 6

Ribbed Type Rowlock Horns - Chrome Plated Zinc - PairSpecs: Finish: Chrome Shank O.D.: 1/2" Shank Length: 1-3/4" Between Horns: 1-3/4"

Round Type Rowlock Horns - Chrome Plated ZincFeatures:Chrome plated zinc alloyShank O.D.:1/2" (1.3cm)Shank Length: 1-3/4" (4.4cm)I.D. Horns: 2" (5.1cm)

Round Type Rowlock Horns - Plain ZincFeatures:Natrual finish zinc alloyShank O.D.:1/2" (1.3cm)Shank Length: 1-3/4" (4.4cm)I.D. Horns: 2" (5.1cm)

PSS Shaft Seal Maintenance & Parts Replacement KitFOR 1 1/4" SHAFT 2 1/4" TUBEAs with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced.Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit s

PSS Shaft Seal Maintenance & Parts Replacement KitFOR 1 1/2" SHAFT 2 3/4" TUBEAs with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced.Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit s

PSS Shaft Seal Maintenance & Parts Replacement KitFOR 1 1/2" SHAFT 3 1/4" TUBEAs with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced.Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit s

PSS Shaft Seal Maintenance & Parts Replacement KitFOR 2" SHAFT 3" TUBEAs with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced.Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfuric

PSS Shaft Seal Maintenance & Parts Replacement KitFOR 2" SHAFT 3 1/2" TUBEAs with any rubber hose below waterline, the PSS bellows must be inspected on a regular basis for any sign of wear, aging or chemical deterioration. The PSS bellow should be replaced in six year intervals. During bellows replacement it is recommended the o-rings & set screws in the stainless steel rotor also be replaced.Bellows may need to be more frequently inspected in an environment where non-sealed batteries emit sulfu

PSS Shaft Seal 1" Shaft 1 3/4" TubeShaft Diameter: 1"Stern Tube Diameter (D): 1-3/4" to 1-7/8"Total Length (A): 6.975"Total Length (compressed) (Compressed A): 6.225"Rotor Diameter (B): 2.375"Carbon Cuff Diameter (C): 2"Stern Cuff Length (E): 1.5"The PSS Shaft Seal is the number one selling marine mechanical seal worldwide and is installed as standard equipment by many of the worlds most reputable boat builders / yards. The PSS Shaft Seal is also recognized as the premiere retrofit (aftermarket)