Aluminum Horizontal Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The tap

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper

Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with SleeveC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: HorizontalFits rails with 1.66" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to

Aluminum Vertical Clamp-On Rod Holder 1-27/32" OD White Powdercoat with SleeveSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The tape

Adjustable Mid Mount Rod Holder Aluminum 7/8" or 1" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 7/8" or 1" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more

Adjustable Mid Mount Rod Holder Aluminum 1-1/4" or 1-5/16" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 1-1/4" or 1-5/6" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive ha

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex KeyThese rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 1.66" or 1-1/2" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm.

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 7/8" or 1" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including di(2-ethyl

Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 1-1/4" or 1-5/16" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals includ

Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex KeyC.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.Features:Style: Adjustable Mid MountFits rails with 1.66" or 1-1/2" measured ODMade from Marine Grade AluminumWARNING: This product can expose you to chemicals including

Single Aluminum 5° Transom Mount Rod HolderThe perfect way to add rod holders to the transom area. Designed with outboard engine wells in mind. An ideal way to add rod holders to a seating station. These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tallgimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are

Outrigger Rod Holder with Liner & Strap - AluminumFeatures:Strong, Stylish and FunctionalIncludes Liner and StrapAluminum

536800S - Flush Mount Rod Holder - 0 Degree - Swivel - 10.5" DeepThe larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole.  Use them when the bottom of the rod holder must have a decorative appearance.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle.  A Black vinyl liner protects rods and is keyed with the gimbal so the liner stays in place. The rod hol

Flush Mount Rod Holder - 30 Degree - Cast Bottom SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.

Flush Mount Rod Holder - 15 Degree - Cast Bottom SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.*Manufactured and labeled as a SeaVee product by C.E. Smi

Flush Mount Rod Holder -15 Degree - SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.*Manufactured and labeled as a SeaVee product by C.E. SmithTechnical S

Flush Mount Rod Holder -30 Degree - SeaVee VersionMade of 316 stainless steel, these flush mount gunnel rod holders feature an extra-large, low-profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal bar so the liner stays in place.*Manufactured and labeled as a SeaVee product by C.E. SmithTechnical S

Dual Rod Holder/Front MountFront-mount rod holder fits all 1 5/16" diameter Cannon booms, including telescopic boom. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracked.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or

Cannon Rod HolderThe Cannon Rodholder features a three-position rod-holding configuration to deliver the fastest baitcast or spinning rod pickup. A rear-position cradle holds baitcasting reels or spinning reels. The middle baitcasting cradle conforms to longer rod butts and shrtens the amount of rod extending through the back of the holder.WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth

Deck Mount PlateThis adaptable 4" x 3" plate works with Cannon dual axis rod holders, pedestal mount tracks and downrigger pedestal mounts. Plates can be mounted in a variety of locations, and a protective mounting boot lets you avoid sharp edges.Includes mounting hardware

NEW - Innovative Trolling System Puts You In ControlAluminum Mounting TrackThis versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

NEW - Innovative Trolling System Puts You In ControlAluminum Mounting TrackThis versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

NEW - Innovative Trolling System Puts You In ControlAluminum Mounting TrackThis versatile track uses locking grooves to prevent accessories from twisting. Pick the length you need, and enjoy easy removal and replacement or our track system accessories. Includes Mounting Hardware

NEW - Innovative Trolling System Puts You In ControlNo matter how you fish - or what your fish for - you can customize our new trolling system to fit yout style. Our new rod holders feature a pistol grip design for one-handed adjustment of the rod angle and a ratcheting system for easy rod removal. Made of High-strength aluminum to withstand the punishment of big water use and can be changed out in a snap with our unique track system.Angled Rod HolderFixedAngled at 60°, with 90° of si

Allows rod holder to mount into the gunnel of the boat. Alignment key allows for 360 degree pivot while holding rod holder securely in place. Includes water-tight cap.

Extension Post f/Cannon Rod Holder - 2-PackFeatures:Extends height of rod holder by 6"Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place

Allows side/deck mount to attach to rail. Adjustable to fit different diameter rails.

Bracket can be mounted on vertical or horizontal surface. Alignment key allows for 360 pivot while holding rod holder securely in place.

60° Rod Holder Grill MountKuuma's rod holder mount enables you to turn any fishing rod holder into a grill mount. The rod holder mount has a 60° angle and an adjustable height. Fits into most rod holders with cross pins.

Rod Storage SystemsSingle Rod Rack SetsAnodized Finish: Bright BlackSimple and efficient rod storage. Constructed of Marine Grade AnodizedAluminum with a variety of Anodized Finishes. Rod Butt is inserted intoClosed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placedinto Locking End of set and Nylon Locking Ring is rotated to lock it in.Will support the heaviest of rods. Can be mounted Horizontally, Verticallyor Overhead.

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.050 O.D. PipeColor: BlackPipe Size:#1Fits:1.050" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. In

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.315 O.D. PipeColor: WhitePipe Size: #2Fits: 1.315" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten.

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 1.660 O.D. PipeColor: BlackPipe Size: #3Fits: 1.660" O.D. PipeMount: VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten

Clamp-On Rod Holder - White Aluminum - Vertical Mount - Fits 1.660 O.D. PipeColor:WhitePipe Size:#3Fits:1.660" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Insta

Clamp-On Rod Holder - Black Aluminum - Vertical Mount - Fits 2.375" O.D. PipeColor:BlackPipe Size:#5Fits:2.375" O.D. PipeMount:VerticalJUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Inst

Rod Butt Extender for Standard & Heavy Swivel Base Rod HoldersComes with one rod butt extender that is extra strong! Made of pure stainless steel. Used on short-butt rods and heavy-duty rod holders and will now fit in heavy swivel base rod holders.*Sold as a single

Single Rod Rack SetsAnodized Finish: White Powder Coat FinishSimple and efficient rod storage. Constructed of Marine Grade Anodized Aluminum with a variety of Anodized Finishes. Rod Butt is inserted into Closed End of set. Vinyl insert protects the Rod Butt. Tip of rod is placed into Locking End of set and Nylon Locking Ring is rotated to lock it in. Will support the heaviest of rods. Can be mounted Horizontally, Vertically or Overhead.

Rod Holder - Medium - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

Rod Holder - Heavy Duty - 0° - Stainless SteelThe choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Lee manufacturers of over 46 different models of flush mounted rod holders. Available in two sizes, Medium (2 in O.D.) and Heavy (2 1/4 in. O.D.) three different angles (0, 15 & 30 degree) in Stainless Steel. All of our Rod Holders, are polished by hand then electropolished Lee’s has the rod holder to suit any task.

King Fish Rod HolderBolt-on king fish rod holder. Designed to mount under the hardtops, for King Fish. They are also great for Stripper Bass and running Mojos. Powder-coated white to match most hardtops. Mount with four 1/4" bolts, hardware not included. Please measure your hardtop before ordering.