Ingenious Blade Protector snaps On And Off Without exposing Your Fingers To dangerously Sharp Cutting edges, Like StrikeMaster's Signature Lazer Blades. Fts All Models Except MP Series.

Ingenious Blade Protector snaps On And Off Without exposing Your Fingers To dangerously Sharp Cutting edges, Like StrikeMaster's Signature Lazer Blades. Fts All Models Except MP Series.

The Strikemaster Lazer Magnum Power Auger Is 10 inches. It Has Twin Serrated Stainless Steel Lazer blaes. There Is a Power Point Center Blade. There Is a tufflIte Dupont zytel Handle System. There Is a tranmIssion With Heat Treated gears. There Is 2.5 Horsepower. It Is environmentally Friendly.

12In X 17In Tin Sign features Rolled edges, embossed features And Durable Weatherproof Finish. Includes Pre-Punched Corner holes For Mounting And Clear Removable Hang Tab For Peg Board Display.

12In X 17In Tin Sign features Rolled edges, embossed features And Durable Weatherproof Finish. Includes Pre-Punched Corner holes For Mounting And Clear Removable Hang Tab For Peg Board Display.

The Strikemaster Mora Blades Are 5 inches. It Is Blue. It features Hand Auger blades.

The Strikemaster Replacement Blade Laser Magnum Is 8 inches Long. They Have Twin Serrated Stainless Steel Blades.

StrikeMaster Lazer Mag Xpress Ice Auger Clears The Way For Your Fishing Day! This Stainless Steel, Serrated, Twin-Bladed, Ice gobbling Lazer Blade Has a 2.0 HP Tecumseh 2-Cycle Engine driving Its Way Through The Dense Surface. Enjoy The 65 ft. Lbs. Of Torque That You Can cOnfidently Control With The Tufflite Dupont Zytel Handle System On Your Side. More: Lt-296 Transmission With Heat Treated gears For Smooth Drilling All The Way Through; 170 Rpm Auger Rotation at Full Load; Compression Relief Va

The Strikemaster Mora Hand Auger Features high alloy carbon steel blades. - powder coated paint to reduce ice build-up. - Soft rubber grips. - Ergonomic designed handle system. - Handle adjusts from 48 inches to 57 inches - Weighs 6 pounds.

The Design Of The Top Handle Knob And Auger Shaft Rotary Hand Grip Is Designed To Improve The Ease Of Use. A Soft Rubber Material Has Been Incorporated Into The Design Which provides incrEased Gripping Control And Ease Of Drilling. High Alloy Carbon Steel Blades Powder Coated Paint To Reduce Ice Build-Up Soft Rubber Grips Ergonomic Designed Handle System Adjustable Handle: Adjusts From 48" - 57"; Weight: 6 Lbs.

The Strikemaster Mora Hand Auger Is 8 inches. It features High Alloy Carbon Steel blades. It Has Powder Coated Paint To Reduce Ice Build-Up. It Has Soft Rubber Grips. There Is An Ergonomic Designed Handle System. The Handle adjusts From 48 inches tp 57 inches And It Weighs 6 pounds.

Chrome Alloy Stainless Steel Replacement blades For Mora Hand Augers. One Set Per Card. 6 Inch Blades.

Chrome Alloy Stainless Steel Replacement blades For Mora Hand Augers. One Set Per Card. 7 Inch Blades.

Chrome Alloy Stainless Steel Replacement blades For Mora Hand Augers. One Set Per Card. 8 Inch Blades.

The Strikemaster Lazer Blades Are 5 inches. They Are Chrome Alloy Stainless Steel Replacement blades. They Are Made For Mora Hand Augers. There Is One Set Per Card.

Honda 35cc 4-Stroke OHC Engine; Vandar Long filiment High Impact Handles; Signature StrikeMaster Steel Drill With Mora Ice Lazar Blades; Polymer Gear Casting yields Lightweight Power; EnvirOnmentally COncious Emission Certified; 2-Year Warranty On Honda Engine

Cushioned,Ergonomically Designed Hndles; Ultra-Lite Rugged Synthetic Auger Flight And Blade Carriage With Mora Ice Lazer Blades; Rugged Metal Shaft And Handle; Adjustable Handle: Adjusts From 48"-57"; Breaks Down Into Two Pieces For Transport And Storage; Chrome-Alloy Stainless Steel Lazer Blades

Cushioned,Ergonomically Designed Hndles; Ultra-Lite Rugged Synthetic Auger Flight And Blade Carriage With Mora Ice Lazer Blades; Rugged Metal Shaft And Handle; Adjustable Handle: Adjusts From 48"-57"; Breaks Down Into Two Pieces For Transport And Storage;

Chrome-Alloy Stainless Steel Lazer Blades

Chrome-Alloy Stainless Steel Lazer Blades

Taking Advantage Of The Most Modern Technology Available, The StrikeMaster Lithium Lazer Auger provides Speed And Torque Without Reduced Power For An Amazing 56 holes In 24" Of Ice On a Single Charge. Built On The proven StrikeMaster 25:1 Transmission And Polymer Gear Casting It delivers Maximum Efficiency With a Lighter Weight Than Ever Before. Features An Oversized Throttle For Ease-Of-Use, Easy On/Off Removable 50-Volt Lithium Ion Battery, Fast Charging-2 Hour, 2-Amp Battery Charger, Polymer

The Strikemaster Lazer Hand Auger Is 5 inches. It Has Chrome-Alloy Stainless Steel blades. There Is a Powder Coated Paint To Reduce Ice Build Up. There Are Soft Rubber Grips. It Also features a Ergonomic Design Handle System. There Is An Adjustable Handle That Goes From 48 To 57 inches.

The Strikemaster Lazer Auger Is 6 inches. It Has Chrome-Alloy Stainless Steel blades. There Is a Powder Coated Paint To Reduce Ice Build Up. There Are Soft Rubber Grips. It Also features a Ergonomic Design Handle System. There Is An Adjustable Handle That Goes From 48 To 57 inches.

The Strikemaster Lazer Auger Is 7 inches. It Has Chrome-Alloy Stainless Steel blades. There Is a Powder Coated Paint To Reduce Ice Build Up.

Chrome Alloy Stainless Steel Replacement blades For Strikemaster Lazer Hand Augers. One Set Per Card. 6 Inch Blades.

The Strikemaster Lazer Blades Are 7 inches. They Are Chrome Alloy Stainless Steel Replacement blades. They Are Made For Mora Hand Augers. There Is One Set Per Card.

Chrome Alloy Stainless Steel Replacement blades For Strikemaster Lazer Hand Augers. One Set Per Card. 8 Inch Blades.

The Strikemaster Lazer Auger Is 8 inches. It Has Chrome-Alloy Stainless Steel blades. There Is a Powder Coated Paint To Reduce Ice Build Up.

The Strikemaster Mora Hand Auger Is 5 inches. It features High Alloy Carbon Steel blades. It Has Powder Coated Paint To Reduce Ice Build-Up

The Strikemaster Ice Auger Sharpener sharpens Lazer Mag, Xl-3000, Cobra, Mag 2000, Mag 3000, And Mag III. It Also sharpens Mora Hand And Lazer Hand, Electra Lazer 12000Dp, Ultra Mag, And Strike-Lite Ice Augers. It Weighs 0.050 pounds.

The Strikemaster Electra Lazer Auger Is 8 inches. It features Twin Serrated Stainless Steel Lazer blades. There Is 12 Volt Battery Pack, Battery Charger, And 1 Amp Car Charger. There Is a 12 Foot External Battery Cable.

The Strikemaster Lazer Auger Blade Guard Is 7 inches. The Heavy Duty Plastic Guard completes The Holding Strap. The Color Is Black.

The Strikemaster Lazer Auger Blade Guard Is 8 inches. The Heavy Duty Plastic Guard completes The Holding Strap. The Color Is Black.

The Strikemaster Lazer Magnum Power Auger Is 8 inches. It Has Twin Serrated Stainless Steel Lazer blaes. There Is a Power Point Center Blade. There Is a tufflIte Dupont zytel Handle System. There Is a tranmIssion With Heat Treated gears. There Is 2.5 Horsepower. It Is environmentally Friendly.

The Strikemaster Replacement Blade Is 8-1/4 inches. It Fits The Model Mag 2000 Model Gas powered Ice Auger. It Is Made Of Boron Steel. Mounting Hardware Is Included.

The Strikemaster Replacement Blade Is 10-1/4 inches. It Fits The Model Mag 2000 Model Gas powered Ice Auger. It Is Made Of Boron Steel. Mounting Hardware Is Included.

The T-H CMC Wedges 2 Degree Pair Are CMC Transom Wedges. They Have Setback Spacers. They Are Designed To Give Extra postive Or Negative Trim. The wedges Are Used as An Aid For boats With An insufficient Transom Angle Or For boats having Playing problems at Low Speed.

The T-H CMC Wedges 5 Degree Pair Are CMC Transom Wedges. They Have Setback Spacers. They Are Designed To Give Extra postive Or Negative Trim. The wedges Are Used as An Aid For boats With An insufficient Transom Angle Or For boats having Playing problems at Low Speed.

The T-H Zippered Rigging Sleeve Is 48 inches Long. It Zips On And Off To Protect Cables And loses. It Is Weather And Uv Resistant. The ends Are Secured With Cable ties.

Other FEATURES:: Made Of Extra Durable Plastic Material & FEATURING The Traditional KA-BAR Oval Handle , MAKES Light Work Of Ice & Snow On WINDSHIELDS Other FEATURES2:: Made In The USA, 4 OUNCES, 6"X5"X3"